Xarig naxaas ah
Hordhac Badeecada
Xaashi naxaas ah oo ku salaysan naxaasta elektaroonigga ah, zinc iyo walxaha raadraaca sida walaxdeeda ceeriin, iyada oo loo marayo farsamaynta ingot, duubista kulul, duubista qabowga, daaweynta kulaylka, nadiifinta dusha sare, jarista, dhammaystirka, ka dibna xidhitaanka. Hawlaha wax-qabadka, balaastikada, sifooyinka farsamada, iska caabbinta daxalka, waxqabadka iyo qasacad wanaagsan. Waxaa si weyn loogu isticmaalay korontada, baabuurta, isgaarsiinta, qalabka, qurxinta iyo warshadaha kale.
Qodobbada Farsamada ee ugu Muhiimsan
2-1 Halabuurka Kiimikada
| Lambarka Daawaha | Halabuurka Kiimikada(%,Ugu badnaan.) | ||||||||
| Cu | Fe | Pb | Al | Mn | Sn | Ni | Zn | Nadaafad | |
| H96 | 95.0-97.0 | 0.10 | 0.03 | --- | --- | --- | 0.5 | Rem | 0.3 |
| H90 | 88.0-91.0 | 0.10 | 0.03 | --- | --- | --- | 0.5 | Rem | 0.3 |
| H85 | 84.0-86.0 | 0.10 | 0.03 | --- | --- | --- | 0.5 | Rem | 0.3 |
| H70 | 68.5-71.5 | 0.10 | 0.03 | --- | --- | --- | 0.5 | Rem | 0.3 |
| H68 | 67.0-70.0 | 0.10 | 0.03 | --- | --- | --- | 0.5 | Rem | 0.3 |
| H65 | 63.5-68.0 | 0.10 | 0.03 | --- | --- | --- | 0.5 | Rem | 0.3 |
| H63 | 62.0-65.0 | 0.15 | 0.08 | --- | --- | --- | 0.5 | Rem | 0.5 |
| H62 | 60.5-63.5 | 0.15 | 0.08 | --- | --- | --- | 0.5 | Rem | 0.5 |
Shaxda Daawaha 2-2
| Shiinaha | ISO | ASTM | JIS |
| H96 | CuZn5 | C21000 | C2100 |
| H90 | CuZn10 | C22000 | C2200 |
| H85 | CuZn15 | C23000 | C2300 |
| H70 | CuZn30 | C26000 | C2600 |
| H68 | ------- | --------- | ------- |
| H65 | CuZn35 | C27000 | C2700 |
| H63 | CuZn37 | C27200 | C2720 |
| H62 | CuZn40 | C28000 | C2800 |
2-3 Astaamaha
Cutubka Tilmaamaha 2-3-1:mm
| Magaca | Lambarka Daawaha (Shiinaha) | Dabeecad | Cabbirka(mm) | ||
| Dhumucda | Ballaca | Dhererka | |||
| Xarig naxaas ah | H59 H62 H63 H65 H68 H70 | R | 4~8 | 600～1000 | ≤3000 |
| H62 H65 H68 H70 H90 H96
| Y Y2 M T | 0.2～0.49 | 600 | 1000～2000 | |
| 0.5～3.0 | 600～1000 | 1000～3000 | |||
Calaamadda Xanaaqa: O. Jilicsan; 1/4H. 1/4 Adag; 1/2H. 1/2 Adag; H. Adag; EH. Aad u adag.
Cutubka Dulqaadka 2-3-2: mm
| Dhumucda | Ballaca | |||||
| Dhumucda U ogolow leexashada ± | Ballaca U Ogolow Kala Duwanaanta ± | |||||
| ＜400 | ＜600 | ＜1000 | ＜400 | ＜600 | ＜1000 | |
| 0.5~0.8 | 0.035 | 0.050 | 0.080 | 0.3 | 0.3 | 1.5 |
| 0.8~1.2 | 0.040 | 0.060 | 0.090 | 0.3 | 0.5 | 1.5 |
| 1.2~2.0 | 0.050 | 0.080 | 0.100 | 0.3 | 0.5 | 2.5 |
| 2.0~3.2 | 0.060 | 0.100 | 0.120 | 0.5 | 0.5 | 2.5 |
Waxqabadka Farsamada 2-3-3
| Dabeecad | Xoogga Tijaabada N/mm2 | Kordhinta ≥% | Adkaanta HV | |
| M | (O) | ≥290 | 35 | ------- |
| Y4 | (1/4 S) | 325-410 | 30 | 75-125 |
| Y2 | (1/2 S) | 340-470 | 20 | 85-145 |
| Y | (H) | 390-630 | 10 | 105-175 |
| T | (EH) | ≥490 | 2.5 | ≥145 |
| R |
---
| --- | --- | |
Calaamadda Xanaaqa: O. Jilicsan; 1/4H. 1/4 Adag; 1/2H. 1/2 Adag; H. Adag; EH. Aad u adag.
Farsamada Wax Soo Saarka
